Liquid chlorine and muriatic acid are the two workhorse chemicals of pool care, but they do very different jobs.

Liquid chlorine: the sanitizer

Liquid chlorine (sodium hypochlorite) kills bacteria and algae and keeps water clear. It is fast-acting and leaves no residue. It also raises pH slightly, which is why it is often paired with acid.

Muriatic acid: the balancer

Muriatic (hydrochloric) acid lowers pH and total alkalinity. Correct pH matters because chlorine works far less effectively when pH is high. The CDC recommends keeping pool pH between 7.2 and 7.8.

How to use them safely

  • Never mix chlorine and acid, not even in the same bucket. Together they release toxic chlorine gas.
  • Add each chemical separately, with the pump running, and wait several hours (or follow the label) before adding the other.
  • Always add chemicals to water, never water to acid.
  • Wear chemical-resistant gloves and eye protection, and work in a ventilated area.
  • Store containers upright, capped and apart from each other, out of reach of children.

A simple routine

Test your water 2–3 times a week. Adjust pH first with acid if needed, then bring chlorine up to your target level. Always follow the dosing directions on the product label.

Shop HOANK pool chemicals →